مشغل LED قابل للتعتيم UL 0-10 فولت 12 فولت 10 أمبير 120 واط
SMT-012-120VDHV2 is 0-10v dimmable led driver 12v . It is 0-10V driver with hardwire box integrated which can be used in wet, damp, dry location. High power factor>0.9, and high efficiency>88%, flicker free. It is compatible with litom's C-M191.
Specification :
|
model |
SMT-012-120VDH (1.0 version) SMT-012-120VDHV2 (1.0 version)
|
SMT-024-120VDH (1.0 version) SMT-024-120VDHV2 (1.0 version)
|
|
|
Output |
DC Voltage |
12V |
24V |
|
|
Voltage Accuracy |
±0.5V |
±0.5V |
|
|
Voltage Regulation |
± 0.5% |
|
|
|
Load Regulation |
± 2%
|
|
|
|
Rated current |
10.00 A |
5.00 A |
|
|
Rated power |
120 W |
120W |
|
Input |
Voltage Range |
100 -277 VAC |
|
|
|
Frequency Range |
47-63 H z |
|
|
|
Power Factor ( Typ. )@ full load |
0. 98@120VAC 0. 95@277VAC |
|
|
|
THD （ Typ. ） @ full load |
< 20% |
|
|
|
Efficiency ( Typ. )@ full load |
83 % @120Vac 86%@277Vac 79 % |
|
|
|
AC Current （ Max . ） |
1.3 A @100VAC |
|
|
|
Inrush Current （ Typ. ） |
20A, 50%, 1.6ms |
|
|
|
Leakage current |
<0. 5 0mA |
|
|
Protection |
S hort C ircuit |
shut down o/p voltage , re-power on to recover after fault condition is remove d |
|
|
|
Over Loading |
≤120% constant current limiting, auto-recovery |
|
|
|
Over temperature |
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
|
|
|
Envi r onment |
Working TEMP. |
-40 ～ + 6 0℃ (see below derating curve) |
|
|
|
Working Humidity |
20 ～ 90%RH, non-condensing |
|
|
|
Storage TEMP. Humidity |
-40 ～ +80℃ , 10 ~ 95%RH |
|
|
|
TEMP .coefficient |
±0.03%/℃ ( 0 ~ 50℃ ) |
|
|
|
Vibration |
10 ～ 500Hz , 5 G 10min./1 cycle,period for 60min. each along X,Y,Z axes |
|
|
Safety&EMC |
Safety standards |
UL8750+UL1310 |
|
|
|
Withstand voltage |
I/P-O/P: 1.88 KVAC |
|
|
|
Isolation resistance |
I/P-O/P : 100MΩ/500VDC/25℃/70%RH |
|
|
|
EMC EMISSION |
FCC Part 15 B |
|
|
Others |
Weight |
1.37 Kg (1.0 version) |
|
|
|
Size |
1.0 version: 220*93*41 mm ( L*W*H ) / 2.0 version: 260*105*45mm |
|
|
|
packing |
10PCS /ctn |
|
|
Notes |
1. All parameters if NOT specially mentioned are measured at 1 2 0VAC input , rated load and 25℃of ambient temperature. 2. To extend the driver's using life ,please reduce the loading at lower input voltage. |
||
Compatible Dimmer Type
SMT50-R-D1 is rotary 0-10 dimmer . It is control dimming by rotary the button. Push the button to switch on and off, and then can control dimming. it is dimming well with klusdesign's WP-K-CR-1820.
Related Products
|
|
It is 12v 100w 0-10v dimmable led driver , with CE UL/cUL FCC ROHS listed. The dimming range can be 0-100%, without any flicker.The input voltage range is 100-277Vac for both North American and European market.
Mode： SMT-012-100VDHV2 intput voltage：110~277V AC Efficiency > 90% Size： 220*94.5*40mm （L*W*H） Weight：1.37Kg/pcs |
